Ceiling Fan Installation Cost Calculator

Swapping an old fan or converting a light fixture to a fan? Get a typical market range and a direct estimate at Dima's flat $60/hr — fan-rated box checked, balanced and wobble-free when it spins.

Typical market range (estimate)
—
What electricians, big-box install services and marketplaces typically charge for this job (labor; the fan itself is separate).
Book direct — $60/hr estimate
—
—
Get my flat quote — book Dima

The booking form confirms your final flat quote before any work starts. Text & email only.

How this estimate is built

Replacing an existing fan is typically 1–1.5 hours: power off and verified, old fan down, bracket and fan-rated box checked, new fan assembled, hung, wired, balanced and tested. A new install where a light fixture sits today runs 2–3 hours because the fixture box gets swapped for a fan-rated braced box. Taller ceilings add ladder time, and a remote receiver or smart switch adds wiring and pairing time. Honest limit: a spot with no existing wiring is a licensed electrician's job first — this calculator covers swaps and fixture-to-fan conversions, and you'll be told straight if your job needs an electrician before a handyman install makes sense.

Ceiling fan questions

Is a special electrical box needed for a ceiling fan?

Yes. A fan needs a fan-rated box braced for the weight and vibration — a standard light-fixture box is not enough. Replacements usually already have one (it gets verified before the new fan goes up). New installs in this calculator include swapping in a fan-rated box where a light fixture was.

What if there is no wiring where I want the fan?

Running brand-new wiring, adding a switch leg or cutting into a ceiling with no existing fixture is licensed-electrician work, not a handyman install. The calculator covers fan swaps and fixture-to-fan conversions; if your spot has no wiring at all, you'll be pointed to an electrician first — honestly, not sold a workaround.

Why does ceiling height change the price?

Above about 10 feet it's taller-ladder or scaffold work: slower, more careful, and the fan usually needs a longer downrod to move air properly (the fan itself should hang 8–9 feet off the floor). Vaulted two-story ceilings add roughly an hour.

Is the direct estimate the final price?

It's an estimate based on typical job time at a flat $60/hr (2-hour project minimum, $120). The fan itself is supplied by you unless arranged in advance. The booking form confirms your final flat quote before work starts, and that confirmed price is what you pay.

More calculators